6000 Bearing Identification and Dimensions
Verification Status
Boundary dimensions for this record match the SKF 6000 source entry reviewed on 11 October 2026. This confirms dimensions only. Exact variant, current load and speed ratings, and cross-brand interchange still require confirmation.
Load ratings, speed limits, mass and internal geometry are withheld until the exact manufacturer variant and source are recorded. Unknown values are not zero.
Source-Checked Boundary Dimensions
| Dimension | Recorded value |
|---|---|
| Bore diameter (d) | 10 mm |
| Outside diameter (D) | 26 mm |
| Width (B) | 8 mm |
Manufacturer Verification
No cross-brand interchange or supplier stock availability has been established for this record. Manufacturer designations can differ even when boundary dimensions match.
| Manufacturer | Exact designation | Evidence |
|---|---|---|
| SKF | See cited dimension source | Dimension evidence is described above; exact variant and replacement suitability remain unconfirmed |
| FAG (Schaeffler) | Not verified | Source review pending |
| NSK | Not verified | Source review pending |
| Timken | Not verified | Source review pending |
| NTN | Not verified | Source review pending |
| Koyo (JTEKT) | Not verified | Source review pending |
| NACHI | Not verified | Source review pending |
How to Identify a Replacement
- Record the full marking from the bearing or equipment parts list, preserving letters, slashes and hyphens.
- Confirm bore, outside diameter and width against the exact manufacturer catalog entry.
- Check closures, clearance, cage, tolerance, lubrication and any special design requirements.
- Compare manufacturer-specific load and speed data with the equipment requirements before selecting a replacement.
A shared number or a dimension match alone does not establish replacement suitability.
Bearing finder · Size guide · Marking guide · Report a correction